Wolf Kirkland repair
(425) 699-2400 Call now

Parts reference

Wolf Gas Range Parts, Explained by What They Do

A Wolf burner that will not behave is nearly always one part of a short chain: the switch behind the knob tells the spark module to fire, the electrode throws the spark, the valve and orifice meter the gas, and the cap and head shape the flame. Name the link that broke and the repair is small.

Each page below starts with what the part is, then what we usually find when we open that part of a range in Kirkland — most common first — and the price band it falls in. If you already know what the range is doing rather than which part, start from the fault states instead, or call Wolf Repair Kirkland on (425) 699-2400.

Five-burner range from above with the front right burner stripped to its base and electrode, the cap on the counter and a wrench on a towel alongside

Spark ignition

What makes the click and decides which burner fires.

The burner on the deck

The pieces you lift off to clean.

Gas supply to the burners

From the wall to the flame ports.

Infrared tops and grates

Charbroiler, griddle and what the pans sit on.

The gas oven

All-gas ranges: oven ignition and the infrared broiler.

Oven heat and electronics

Sensor, element, fans and the dual fuel control.

The oven door

Hinges and the seal.

Wide stainless pro-style gas range with the oven door open and one cooktop burner taken apart

Book the diagnostic

Name the burner, the knob and what it does.

Read us the model off the rating plate and describe the flame, the click or the smell. The visit is a $89 service call that comes off the bill if you go ahead, and the repair figure is agreed before a panel is lifted — anywhere in Kirkland.

Visits 8:00 am – 8:00 pm, seven days · calls taken 24/7

Talk to a tech
Call the tech line (425) 699-2400 Not urgent? Book online