Fault state · On the cooktop
No Spark on Any Burner: Wolf Igniters Not Clicking
When no burner clicks from any knob, the ignition system has no power or no output. Wolf's igniters are electric and cannot spark without power, so start at the breaker: off for 30 seconds, then back on. If the range has power and is still silent, the spark module or its supply is the usual cause. Wolf Repair Kirkland, (425) 699-2400, tests which.
Greg Lindqvist Cooking-appliance technician — gas ignition and burners · 18 years in the trade
Normal
- During a power cut. With no power there is no spark, and Wolf's gas range guide says a surface burner can then be lit by hand with a multi-purpose lighter, knob turned to Hi.
Fault
- The range has power — the clock, display or oven light works — yet no knob produces a click.
- The breaker has been off for 30 seconds and back on, and still not one burner sparks.
What to check first
Push the knob in and turn it to Hi, which is the position Wolf lights a surface burner from. Then look at whether the rest of the range is alive. A dark display or oven light means the range has no power at all, and the breaker comes before anything else. A range that is clearly powered but silent at every knob has moved past the owner checks.
What we usually find in Totem Lake
Most ranges here are newer builder-fitted 30-inch models, so worn-out parts are not the first suspect. Most often it is supply: a tripped breaker, or a circuit shared with something that trips it. Sometimes a spill has reached the switches behind the knobs. Rarely the module itself has stopped, and that is the one that needs a part.
Asked about this state
Can I keep cooking on the burners while I wait for a repair?
Not with a lighter. Wolf describes lighting a surface burner by hand only for a power outage. With the power on and no spark, the automatic relighting has gone as well, so leave the burners off until the ignition has been checked. Wolf Repair Kirkland, (425) 699-2400, can often say on the phone what is likely.
